The ERR_NETWORK_CHANGED error is one of the most common in Google Chrome. When using the Chrome browser to connect to the internet, users can experience a variety of errors, which can be frustrating if you don’t know what’s causing them or how to fix them.
What is the meaning of this error message?
In other words, the ERR_NETWORK_CHANGED error prevents the user from accessing a website by stopping it from loading normally. Since this error could be caused by a variety of factors, it’s important to consider a variety of possible solutions. It’s likely that what works for someone else won’t work for you.
“Unable to reach the network” is one of the error messages that can be shown. “Your connection was interrupted,” or “ERR_NETWORK_CHANGED.”A network change was detected. Make sure your internet connection is working.
This error now affects Google, Gmail, Facebook, YouTube, and a variety of other websites, which is why it is so irritating. You won’t be able to use Chrome until you fix the issue.
What causes this error?
This error normally occurs when Google Chrome senses a change in your PC’s IP address. On all networks, each device is given a unique IP address that aids in connecting to the internet. Certain limits are imposed by your Internet Service Provider (ISP) and website owners based on your IP address.
The use of a VPN or a proxy service is now commonplace. Users use these to adjust their IP addresses so that they can access a limited website. One of the reasons you’re getting this error can be because of this.
The following is a troubleshooting guide for the ERR_NETWORK_CHANGED error, which contains a few tried and true solutions.
Different Solution To Fix ERR_NETWORK_CHANGED error in Chrome
Solution 1: Restart your modem
Let’s start with some simple solutions before moving on to more complicated ones. Often the issue is easier to solve than it seems. It’s possible that the error was caused by internal and technological problems. In this situation, restarting the modem might be a viable option.
Solution 2: Switch off VPN and/or proxy servers.
As previously highlighted, VPNs are used to redirect internet connections and can allow you access to restricted content. If you’re using a VPN or proxy server, there’s a good chance that’s what’s causing your Chrome error.
The simple ways to disable automatic proxy on Windows 10 are as follows:
- Go to Settings by clicking on Start Menu.
- Type Network & Internet
- Go to the Proxy tab and make sure that all proxy configuration options are turned off.
The measures to disable proxy on a Mac are as follows:
- Go to Device Preferences from the main menu or the Apple logo in the top-left corner of the screen…
- Select Network.
- Select the WiFi network to which you are currently linked.
- Select Advanced…
- Select OK after navigating to the Proxies tab and checking that all boxes are unticked.
Related: How To Solve SEC_ERROR_REVOKED_CERTIFICATE
Solution 3: Switch off the Ethernet or WiFi.
WiFi or an Ethernet port are the two most popular ways to connect to the Internet on most PCs. First, see if your PC supports both, and if so, allow both. If the connection is switching between wired and wireless, this may be the source of the problem.
Disable the WiFi option on your laptop or remove the ethernet cable to solve the problem. Since the internet is now only cnnected by a single source, this guarantees a stable link.
Solution 4: Disable and Reinstall your network adapter drivers
The ERR_NETWORK_CHANGED error on a Windows PC may also be caused by network adapters. In most cases, this issue does not arise on a Mac.
To resolve network adapter problems, follow these steps:
- Check for Device Manager by searching through the Start Menu.
- Scroll down and pick Network Adapters from the options.
- Right-click the adapter you’re using right now. (You can check for any hardware problems here if you want.)
- Disable the network adapter and then re-enable it.
- Return to your Chrome browser and attempt to load the page again.
Solution 5: Remove the DNS Cache
To flush the DNS on Windows 10, follow these steps:
- To do so, press the Windows key + X. The power user menu will appear as a result of this command.
- Select Command Prompt, run as Admin.
- Hit enter after typing the command ipconfig/flushdns.
- Restart your computer.
- In your browser, reload the page again.
Solution 6: Try Google Public DNS
DNS settings can have a big impact on your network connection and even cause it to time out.
Your PC’s DNS settings are included in the TCP/IP protocol settings. The DNS server information may be updated, and the procedure varies depending on the operating system installed on your computer. It’s important to use a dependable DNS server like Google DNS. If the network error persists, consider removing all manual DNS servers and relying on the default DNS server supported by your ISP for future network connections.
Solution 7: In Google Chrome, clear the cache and browsing data.
Here’s how you can do it:
- Start the Chrome web browser. Press Ctrl + H on a Windows device, or Command + Y on a Mac. Alternatively, open the History tab by clicking the three dots in the top right corner.
- Click the Clear browsing data option in the left panel
- This will bring up a window asking you to choose a time period. Choose between Beginning of time or All time (depending on the version of Chrome you are using).
- Remember to check the boxes for Browsing History, Cookies and Other Site Data, and Cached Images and Files as well.
- Click Clear data.
- Close your browser, restart your device, and try again.
Solution 8: Reset the TCP/IP protocol
This is commonly used as a follow-up to the previous approach. Follow these steps below
- To do so, Press the Windows key + X. The power user menu will appear as a result of this operation.
- Select Command Prompt from the drop-down menu (Admin).
- Then, one by one, type the following commands:
- ipconfig/release and hit enter
- ipconfig/flushdns and hit enter
- ipconfig/renew and hit enter
- Type the following commands in the Command Prompt: ipconfig/flushdns, nbtstat – r, netsh int ip reset, netsh winsock reset
- Restart your computer and reload the pages in your browser.
Also Read: What is the meaning of com osp app signin? | Best Guides
Solution 9: Disable the power-saving mode.
When the power saver mode is allowed in Windows 10, the wireless adapter shuts down. This disrupts the network connection and, as a result, causes err_network_changed error. Follow the steps below to remove the cause of the problem:
- Search for Device Manager by clicking the Start button.
- Right-click the network adapter you’re actually using and pick Properties.
- Go to the Power Management section.
- Disable the option that says “Allow the computer to turn off this device to save power”.
- Reload the webpage
Solution 10: Get in touch with your Internet Service Provider (ISP)
If none of these suggestions work for you, you can contact your ISP about the ERR_NETWORK_CHANGED error. They will be able to assist you by making backend improvements that will have a positive effect on your network.